Welcome, Guest
Username: Password: Remember me

TOPIC: Agor-25 Research Vessel Atlantis

Agor-25 Research Vessel Atlantis 6 months 2 weeks ago #4965

  • proflooney
  • proflooney's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Karma: 0
I was wanting to do a large model of the Research Vessel Atlantis for radio control.
I have a profile view and some deck plans but nothing on the hull. I cant seem to get the hang of delftship as I am so used to doing solidworks with offset tables and the such. I am using version 8.06 the free version but cant seem to come up with anything useful.

I was wondering of anyone that knows stuff about ship hulls could help me with this. the info I have on the ship is below:

R/V Atlantis Specifications


Built: 1997
Length: 274 feet
Draft: 19 feet (5.8 m)
Displacement: 3,510 LT
Range: 17,280 NM
Laboratories: 3,517 sq. feet
Speeds: 11.0 knots cruising
Alvin Conversion: 1997
Beam: 52.5 feet
Gross Tons: 3,200 T
Complement:
Crew - 22
Scientists - 24
DSOG - 12
SSSG Techs - 2
Endurance: 60 days
Fuel Capacity: 267,540 gallons
Propulsion: Diesel-electric, azimuthing stern thrusters
Bow Thruster: Azimuthing jet 1,180 SHP
Ship Service Generators: Three 715 kw 600 VAC
Portable Van Space: At least six 20 ft. vans
Winches:
Traction - 30,000' .68" EM or 9/16" wire
Hydro - 33,000' 3-cond. EM or 1/4" wire
Heavy Equipment:
Cranes - two @ 42,000 lbs. cap.
HIAB cranes (2)
Midships hydro boom
Sewage System: Envirovac flushing system
Ownership: Title held by U.S. Navy; operated under charter agreement with Office of Naval Research
Other Features: Dynamic positioning system, ROV and submersible hangars, fully equipped machine shop, two rigid-hull inflatable rescue/work boats

it is also listed as an AGOR-25 if that means anything
Attachments:
The administrator has disabled public write access.

Agor-25 Research Vessel Atlantis 6 months 2 weeks ago #4966

  • proflooney
  • proflooney's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Karma: 0
also how do you get delftship to export the offset tables. I can get it to do the line drawings but cannot find anything about offset tables
The administrator has disabled public write access.
Time to create page: 0.165 seconds
Powered by Kunena Forum